Blog

I’m gonna show you how to connect your stereo wireless speakers to your TV now the reason why I chose these speakers is because a has stereo technology built in which creates a left and right channel so we’re gonna test it out on my TV now there’s two ways to connect it to your TV if you have an Amazon fire TV stick like I do I watched Hulu TV which is my TV service which has like local channels and live TV channels like Nickelodeon Disney Channel but if you don’t have that you have a regular cable box and then you’re going to need to purchase an audio transmitter make sure it has a PTX low latency technology built into the transmitter make sure it has really good reviews before you buy the transmitter make sure  these are wireless or you can have it powered on always has auto off feature so it saves you no battery life if you have you know it disconnected from a power source battery lasts about six to eight hours depending on your volume and it has a battery indicator right here these LEDs let you know the battery life and it has FM mode and it’s water-resistant so you can take it in the shower but we’re going to connect it using the stereo feature so I spin around this way and these are the stereo buttons right here and we’re gonna connect it right now so I’m gonna turn it on Bluetooth mode power ohm oxy mode there’s the battery life right there so it looks like it’s full battery life and if you press it again you get the FM mode press again is aux mode and then you plug it in your zero aux input right there you see that 3.5 input and or you’ve used a micro SD card but there’s music on that to play your music off the SD card micro SD card and there’s the power port or the charging port actually and the speakers turn this one on how long actually blue cheese no so make sure they’re both in Bluetooth mode and make sure they’re near by each other and to the Bluetooth transmitter now I’m going to go ahead and go into settings and then you want to go to Bluetooth devices select that go to Bluetooth devices and Bluetooth all right now it’s searching and let’s see if it connects all right it looks like it found it let’s go ahead and select to connect it’s pairing right now it last here’d like your router has five gigahertz choose two five gigahertz signal when now connecting your fire TV stick to the router otherwise you may have some signal issues make sure they’re both in Bluetooth mode Bluetooth mode all right there we go what was it in Bluetooth mode so now that it’s connected the blue light on the stereo bud is the left channel and orange light is the right channel so keep that in mind so if you’re facing the TV this is going to be on the left side of you and this is going to be in the right side of you and check it out this is the right channel now if you lower the volume on wine it does it on both let’s raise the volume all right now hit pause and then hit pause it pauses it on the fire TV stick now if you hit play it plays all right so we’re gonna go ahead and get started first I’m gonna turn on this device so I want to use it as a Bluetooth transmitter from my TV to these speakers so what we’re gonna do is plug it into the transmit port which is the red port that you see right here so we’re gonna plug that in right here alright now it does have a built in battery so I don’t have to have it plugged into my TV USB port unless I want it always powered on otherwise you go if you I want to always powered on just plug this into your USB port on your TV or if you have a USB adapter so we’re gonna go ahead and turn that on press and hold I button in the center ok that’ll start to blink it’s in transmit mode it’s blinking really fast let’s go ahead and turn this on power ohm Bluetooth mode okay and let’s see if it connects device here’d we’re gonna plug it into the audio out on my TV and once again if you don’t have audio Ally on your TV and you can use the headphone jack on your TV that works the same yeah and why it goes away of course that’s the left channel red goes to red alright yeah it’s blinking slowly so it is still connected I’m going to keep this away from other wireless devices by the way so if you have a wireless router nearby make sure it’s about at least 2 feet away from this device and then press the true Wireless Stereo button device disconnected oh let’s try it again so you want this in bluetooth mode and she connect automatically according to the manual there it is so this is the left channel this is the right channel so if you guys are interested in these speakers this is the m400 model they have the built in stereo technology which is really cool if you’re interested in these speakers .